Warm your Fleshlight sleeve by soaking it in a sink/tub filled with warm water. If necessary, drain the water and repeat the process with new warm water. Do NOT boil or microwave your sleeve! Shake off the water and replace the sleeve in the Fleshlight case, adjust the tightness of the cap at the bottom to vary the suction of the sleeve, and finish by applying a liberal amount of lubricant to the Fleshlight and yourself. If the Fleshlight still feels too cold to you, then next time try warming the lube in the sink/tub at the same time as the sleeve. The Fleshlight is now ready for use.

To clean, simply rinse your Fleshlight sleeve with warm water from your sink and allow time for both to dry before storing. Do NOT use soap to clean your sleeve. For tough cleaning, we suggest using isopropyl alcohol.

To maintain that soft feel, sprinkle a liberal amount of corn starch on the sleeve and shake off the excess powder. We do NOT recommend the use of talcum or baby powder. NOTE: Powdering of an Ice Fleshlight with Talc will cause it to gradually cloud over. Shake out as much water as possible and place in a well ventilated area. For quick drying, slide a thin cloth/towel (lint-free preferably) through it from one end to the other. When you return it to the case, make sure to leave the end caps loose so that air can continue to circulate.

We recommend the use of water-based lubricants only. Oil-based lubricants should NOT be used, since they will slowly destroy the Fleshlight material over time.